| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-100G-AOC5M | |
| 2 | Arista Networks | AOC-Q-Q-100G-5M | |
| 3 | Dell | AOC-QSFP28-100G-5M | |
| 4 | Juniper Networks | JNP-QSFP28-AOC-5M | |
| 5 | NVIDIA/Mellanox | MFA1A00-C005 | |
| 6 | H3C | QSFP-100G-D-AOC-5M | |
| 7 | Brocade | QSFP28-100G-AOC-5M |
Key Technical Specifications
| Cisco Compatible |
QSFP-100G-AOC5M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP28 to QSFP28 | Max Data Rate | 100Gbps |
| Operating Wavelength | 850nm | Fiber Cable | OM3 MMF |
| Cable Length | 5m (16ft) | Power Consumption | ≤2.2W |
| Jacket Material | OFNP | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Minimum Bend Radius | 30mm | Protocols | IEEE 802.3 bm, SFF-8665 |
| Application |
100G Ethernet
|
Warranty | 5 Years |
Usage Guidelines & Best Practices
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this Cisco compatible 100g active optical cable 5m supplied by us can interoperate with mainstream network brands for mixed-vendor rack stacking and server fabric expansion.






Q1: How does latency on a 5m Cisco compatible 100G QSFP28 AOC compare to 100G copper DAC? A: This Cisco compatible 100g active optical cable 5m brings only nanosecond-scale latency from internal electro-optical conversion circuits. The tiny delay will not hinder HPC, cloud and enterprise data center workloads from HYTOPTODEVICE.
Q2: Will tight coiling or sharp bends permanently damage the fiber inside 100G QSFP28 AOC assemblies? A: Yes. These 100G AOCs follow a 30mm minimum bend radius specification. Bending beyond this limit may crack internal glass fiber and permanently break the 100G link of our Cisco compatible 100g active optical cable 5m.
Q3: Can high-voltage power trunking near data center racks create EMI issues for 100G active optical cabling? A: No. Signal transmission relies on light pulses inside glass fiber instead of electrical signals. The Cisco compatible 100g active optical cable 5m from HYTOPTODEVICE is fully immune to electromagnetic interference.
Q4: Is signal jitter a common concern for 100G QSFP28 AOC cross-rack links? A: No. Integrated CDR circuits inside each transceiver recover and clean high-speed signals, keeping bit error rates extremely low for our Cisco compatible 100g active optical cable 5m in dense fabric environments.
Q5: Can unconfigured third-party 100G AOC run plug-and-play on Cisco and NVIDIA Mellanox switches without transceiver error alerts? A: You need to select the correct EEPROM coding matching your hardware during ordering. Improper coding will trigger transceiver unsupported warnings. HYTOPTODEVICE pre-codes this Cisco compatible 100g active optical cable 5m for Cisco platforms.
Q6: Can Cisco switch firmware updates render aftermarket 100G QSFP28 AOC non-functional? A: MSA-standard EEPROM chips fitted on our Cisco compatible 100g active optical cable 5m tolerate most minor firmware upgrades. Rare strict vendor lock policies may block third-party cables, and we offer re-coding support.
Q7: Are generic 100G AOCs compatible with white-box switches running SONiC or Cumulus Linux? A: Yes. Open-source network operating systems rarely enforce rigid vendor lock-in. Our Cisco compatible 100g active optical cable 5m supports simple plug-and-play deployment on open networking switches.
Q8: Do I need matched EEPROM settings on both ends for a cross-rack 100G AOC direct link? A: Yes. Each QSFP28 end must carry EEPROM data matching the connected switch or server port. HYTOPTODEVICE completes dual-end programming for this Cisco compatible 100g active optical cable 5m based on your connection topology.
Q9: Is manual FEC port setup required for reliable 100G AOC cross-rack interconnections? A: Most 100G fabric links require Reed-Solomon FEC enabled on switch ports to maintain stable transmission. The exact rule depends on your switch vendor and link length for our Cisco compatible 100g active optical cable 5m.
Q10: What commands confirm that a Cisco switch correctly identifies a 100G QSFP28 AOC transceiver? A: You can run CLI commands including show interface transceiver or show inventory to validate module detection. This Cisco compatible 100g active optical cable 5m supports full DDM reporting for easy status checking.
Q11: What troubleshooting steps fix intermittent link flapping after installing 100G cross-rack AOC? A: Review switch error counters, verify correct FEC configuration, inspect and clean optical contacts, and review DOM telemetry for abnormal optical power readings on our Cisco compatible 100g active optical cable 5m.
Q12: Is power draw higher on 100G QSFP28 AOC compared with passive twinax DAC cables? A: Yes. Laser and conversion hardware on both ends consume power, typically 2.5W to 4.5W per assembly, while passive copper DAC uses zero power. Our Cisco compatible 100g active optical cable 5m meets standard power specs.
Q13: Can insufficient rack airflow cause thermal overheating for 100G QSFP28 AOC transceivers? A: The Cisco compatible 100g active optical cable 5m works reliably within 0°C–70°C. Sealed racks with poor airflow will push transceiver temperature above limits and risk unstable links.
Q14: How robust are the pull latch and tab structures on QSFP28 connectors of 100G AOC cables? A: Standard pull-release latches support 50–100 normal hot-swap cycles. Pulling the cable jacket instead of the tab will break the latch. Every Cisco compatible 100g active optical cable 5m from HYTOPTODEVICE passes latch inspection before shipment.
Q15: Can technicians splice or repair a cut or crushed 100G QSFP28 AOC on site? A: No. Integrated transceivers are miniaturized and factory assembled. Field splicing is impossible, and damaged units must be fully replaced. HYTOPTODEVICE supplies replacement Cisco compatible 100g active optical cable 5m for bulk projects.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






