| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-100G-AOC7M | |
| 2 | Arista Networks | AOC-Q-Q-100G-7M | |
| 3 | Dell | AOC-QSFP28-100G-7M | |
| 4 | Juniper Networks | JNP-QSFP28-AOC-7M | |
| 5 | NVIDIA/Mellanox | MFA1A00-C007 | |
| 6 | H3C | QSFP-100G-D-AOC-7M | |
| 7 | Brocade | QSFP28-100G-AOC-7M |
Key Technical Specifications
| Cisco Compatible |
QSFP-100G-AOC7M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP28 to QSFP28 | Max Data Rate | 100Gbps |
| Operating Wavelength | 850nm | Fiber Cable | OM3 MMF |
| Cable Length | 7m (23ft) | Power Consumption | ≤2.2W |
| Jacket Material | OFNP | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Minimum Bend Radius | 30mm | Protocols | IEEE 802.3 bm, SFF-8665 |
| Application |
100G Ethernet
|
Warranty | 5 Years |
Usage Guidelines & Best Practices
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this cisco compatible 100G QSFP28 to QSFP28 active optical cable supplied by us can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.






Q1: How does signal latency of a 7m 100G QSFP28 AOC compare to twinax DAC for cross-rack fabric links? A: This 100G QSFP28 to QSFP28 Active Optical Cable creates minimal nanosecond-level latency from electro-optical conversion circuits. This tiny delay will not impact HPC, cloud and enterprise workloads when deployed from HYTOPTODEVICE.
Q2: What risk occurs if I tightly coil this 7m 100G AOC beyond the recommended bend radius? A: Yes. These 100G AOC assemblies follow a 30mm minimum bend radius requirement. Excessive bending can fracture internal glass fibers and permanently break the 100G link of our Cisco compatible 7m AOC.
Q3: Can power distribution cables running alongside data racks create EMI interference on 100G QSFP28 AOC links? A: No. Signal transmission relies on light pulses across glass fiber rather than electrical signals. The 100G QSFP28 to QSFP28 Active Optical Cable supplied by HYTOPTODEVICE is fully immune to electromagnetic interference.
Q4: Is signal jitter a notable risk factor for long cross-rack 100G AOC connections? A: No. Integrated CDR chips inside each transceiver recover and clean high-speed signals, maintaining ultra-low bit error rates for our 7m Cisco compatible 100G AOC in dense multi-vendor fabric environments.
Q5: Will unprogrammed third-party 100G AOC run plug-and-play on Cisco and NVIDIA Mellanox switches without transceiver alert errors? A: You need to select the correct EEPROM coding matched to your hardware during ordering. Improper coding will trigger unsupported transceiver warnings. HYTOPTODEVICE pre-programs this 100G QSFP28 to QSFP28 Active Optical Cable for Cisco platforms.
Q6: Can Cisco switch firmware upgrades disable aftermarket 100G QSFP28 AOC cables? A: MSA-compliant EEPROM chips fitted on our 7m Cisco compatible 100G AOC tolerate most minor firmware updates. Rare strict vendor lock-in policies may block third-party cables, and we offer re-coding support for bulk clients.
Q7: Are generic 100G AOC cables compatible with white-box switches running SONiC or Cumulus Linux? A: Yes. Open-source network operating systems seldom enforce rigid vendor lock restrictions. Our 100G QSFP28 to QSFP28 Active Optical Cable supports plug-and-play deployment on open networking switches.
Q8: Is matched EEPROM programming required on both cable ends for stable cross-rack 100G direct links? A: Yes. Each QSFP28 connector end must carry EEPROM data matching the connected switch or server port. HYTOPTODEVICE completes dual-end programming for this 7m AOC based on your actual connection topology.
Q9: Do I need to manually enable FEC on switch ports for reliable long-distance 100G AOC interconnections? A: Most 100G fabric links require Reed-Solomon FEC enabled on switch ports to sustain stable transmission. The exact rule depends on your switch vendor and link length for our 100G QSFP28 to QSFP28 Active Optical Cable.
Q10: What CLI commands verify a Cisco switch has successfully identified a 100G QSFP28 AOC transceiver? A: You can run commands such as show interface transceiver or show inventory to validate module detection status. This 7m Cisco compatible AOC supports full DDM reporting for convenient link status inspection.
Q11: What troubleshooting steps resolve intermittent link flapping after installing long cross-rack 100G AOC? A: Check switch interface error counters, confirm FEC settings are correctly configured, inspect and clean optical contacts, and review DOM telemetry for abnormal optical power readings on our 100G QSFP28 to QSFP28 Active Optical Cable.
Q12: Does 100G QSFP28 AOC consume more power than passive twinax DAC cables? A: Yes. Laser and signal conversion hardware on both ends draw power, typically 2.5W to 4.5W per assembly, while passive copper DAC draws zero power. Our 7m Cisco compatible AOC meets standard industry power specifications.
Q13: Can poor rack airflow cause thermal overheating for integrated transceivers on 100G QSFP28 AOC? A: The 100G QSFP28 to QSFP28 Active Optical Cable works reliably within 0°C–70°C operating range. Sealed racks with insufficient airflow will push transceiver temperature above limits and lead to unstable links.
Q14: How durable are the pull tab and latch assemblies on QSFP28 connectors of 100G AOC? A: Standard pull-release latches support 50–100 normal hot-swap cycles. Pulling the cable jacket instead of the dedicated tab will damage the latch. Every 7m Cisco compatible AOC from HYTOPTODEVICE passes latch inspection before shipment.
Q15: Can field technicians splice or repair a cut or crushed 100G QSFP28 AOC on site? A: No. Integrated transceivers are factory assembled with miniaturized optics. Field splicing is not feasible, and damaged units must be fully replaced. HYTOPTODEVICE supplies replacement 100G QSFP28 to QSFP28 Active Optical Cable for bulk data center projects.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






