| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-4SFP25G-AOC7M | |
| 2 | Arista Networks | AOC-Q-4S-100G-7M | |
| 3 | Dell | AOC-Q28-4SFP28-25G-7M | |
| 4 | Juniper Networks | JNP-100G-AOCBO-7M | |
| 5 | NVIDIA/Mellanox | MFA7A50-C007 | |
| 6 | H3C | QSFP28-4SFP28-AOC-7M | |
| 7 | Brocade | 100G-Q28-S28-AOC-0701 |
Key Technical Specifications
| Cisco Compatible |
QSFP-4SFP25G-AOC7M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP28 to 4 x SFP28 | Max Data Rate | 100Gbps |
| Operating Wavelength | 850nm | Fiber Cable | OM3 MMF |
| Cable Length | 7m (23ft) | Power Consumption | 2.2W (QSFP28 End) 0.8W (SFP28 Per End) |
| Jacket Material | OFNP | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Minimum Bend Radius | 30mm | Protocols | QSFP28 MSA, SFP28 MSA |
| Application |
25G/100G Ethernet, InfiniBand QDR
|
Warranty | 5 Years |
Usage Guidelines & Best Practices
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this cisco compatible qsfp28 to sfp28 breakout AOC cable supports mixed-vendor networking hardware. can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.





Q1: Can this 7m Cisco compatible breakout AOC run smoothly on multi-vendor switch platforms for data center expansion? A: Yes. This QSFP28 to sfp28 breakout cable from our supply line follows MSA specs. HYTOPTODEVICE provides tailored EEPROM coding to guarantee compatibility across Cisco, Arista, Dell and Juniper switches.
Q2: Are bulk purchased 7m 100G breakout AOCs manufactured according to official MSA mechanical and optical standards? A: Yes. Our breakout AOC strictly meets SFF-8636 MSA requirements. Standardized dimensions ensure seamless hot plug and reliable optical performance for wholesale deployments.
Q3: Will inserting this 100G QSFP28 breakout AOC into a legacy 40G QSFP+ switch port establish a valid data link? A: No. QSFP28 and QSFP+ use different electrical pin definitions. This 7m AOC cannot negotiate links without dedicated speed conversion transceivers.
Q4: Which breakout cabling option is better for 7-meter cross-rack runs: AOC or copper DAC? A: AOC is the preferred solution for 7m links. Copper DAC suffers severe signal attenuation at this length, while our HYTOPTODEVICE breakout AOC resists EMI and maintains stable 25G per-channel throughput.
Q5: When should infrastructure engineers select MTP trunk fiber instead of plug-and-play 100G breakout AOC for rack interconnection? A: Choose MTP trunk for reconfigurable, long-distance cabling. This 7m QSFP28 breakout AOC is ready for direct plug-and-play fixed 100G to 4×25G fanout connections.
Q6: Why is the maximum reach of 100G DAC twinax much shorter than traditional 10G DAC cables? A: 100G signaling operates at higher frequencies with higher crosstalk. Copper twinax cannot sustain signal integrity over longer distances, while our 7m breakout AOC uses optical transmission to bypass copper distance limits.
Q7: How to prevent connector strain damage when deploying a 1-to-4 SFP28 breakout cable across multiple server racks? A: Use cable trays and reserve slack loops. Route four SFP28 pigtails separately, maintain 30mm minimum bend radius, and protect the fanout point of this QSFP28 to sfp28 breakout cable.
Q8: What is the power consumption difference between 100G to 4×25G DAC and breakout AOC for inter-rack links? A: DAC consumes nearly zero power. Our 7m AOC draws 2.2W at the QSFP28 host end and 0.8W for each SFP28 breakout end to support stable optical-electrical conversion.
Q9: Will network performance degrade if I leave some SFP28 breakout ports unused during deployment? A: No. Active channels keep running at full 25G speed. We recommend dust caps on idle SFP28 ports to protect optical interfaces of this bulk breakout AOC.
Q10: What quality tests are performed before we ship breakout AOCs to wholesale purchasers? A: We complete DDM calibration, line-rate burn-in and loopback error testing. Every unit from our QSFP28 to sfp28 breakout cable supply passes inspection before delivery.
Q11: Are third-party compatible breakout AOCs reliable enough for enterprise data center bulk rollout? A: Qualified third-party AOCs match OEM performance. Our wholesale breakout AOC uses MSA-compliant components and custom EEPROM programming to eliminate switch firmware warning messages.
Q12: Can this 7m 100G breakout AOC support low-latency block storage traffic in SAN environments? A: Yes. It maintains ultra-low bit error rate. This Cisco compatible breakout AOC works reliably for SAN replication and high-volume storage data transmission.
Q13: What warranty terms are available for bulk procurement of our QSFP28 breakout AOC cables? A: We offer long-term warranty for wholesale orders. Manufacturing defects on this 7m breakout AOC qualify for replacement or EEPROM reconfiguration support from HYTOPTODEVICE.
Q14: Can buyers request custom unequal breakout leg lengths for unique rack layout projects? A: Yes. HYTOPTODEVICE accepts custom breakout leg length requests within our QSFP28 to sfp28 breakout cable supply program. Contact our sales team for custom specs and MOQ details.
Q15: What global certifications are required for breakout AOC cables exported to overseas data center clients? A: RoHS, CE and FCC are mandatory. Our wholesale breakout AOC holds these certifications to satisfy environmental and EMC compliance for global data center deployments.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






