| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-H40G-AOC15M | |
| 2 | Arista Networks | AOC-Q-Q-40G-15M | |
| 3 | Dell (Force10) | CBL-QSFP-40GE-15M | |
| 4 | Juniper Networks | JNP-40G-AOC-15M | |
| 5 | NVIDIA/Mellanox | MC2206310-015 | |
| 6 | H3C | QSFP-40G-D-AOC-15M | |
| 7 | Extreme | 40GB-F15-QSFP | |
| 8 | Brocade | 40G-QSFP-QSFP-AOC-1501 |
Key Technical Specifications
| Cisco Compatible |
QSFP-40G-AOC15M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP+ to QSFP+ | Max Data Rate | 40Gbps |
| Operating Wavelength | 850nm | Fiber Cable | OM3 MMF |
| Cable Length | 15m (49ft) | Power Consumption | ≤1.4W |
| Jacket Material | OFNP | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Minimum Bend Radius | 30mm | Protocols | 10G/40Gigabit Ethernet or Fibre Channel |
| Application |
InfinibandQDR/DDR/SDR,40G Ethernet,Data Center,Fibre
Channel
|
Warranty | 5 Years |
Usage Guidelines & Best Practices
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 40G QSFP+ Active Optical Cable AOC manufactured by HYTOPTODEVICE can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.






Q1: What distance limits apply to this 15m 40G QSFP+ AOC for data center fabric links? A: Standard 40G QSFP+ AOC can reach up to 100m over OM3/OM4 multimode fiber. As a professional 40G QSFP+ Active Optical Cable AOC manufacturer, our 15m model is ideal for long-span inter-rack runs where passive copper DAC cannot cover the distance.
Q2: Can this Cisco compatible 15m 40G AOC be deployed in outdoor or non-temperature-controlled locations? A: No, standard data center AOC from our 40G QSFP+ Active Optical Cable AOC manufacturer lineup is designed only for indoor climate-controlled environments (0°C to 70°C). Outdoor connections require armored fiber cables paired with separate transceivers.
Q3: What damage may occur if the AOC cable jacket is pulled forcefully during installation? A: AOC internal fiber assemblies are fragile and cannot withstand high tension. Rough pulling on the jacket may separate internal fiber cores from the transceiver ends. Our 40G QSFP+ Active Optical Cable AOC manufacturer recommends routing gently and gripping only the latch when plugging/unplugging.
Q4: Will nearby power cables cause electromagnetic interference to this 40G QSFP+ AOC link? A: No. Optical signals travel over glass fiber instead of copper conductors, so the cable is fully immune to EMI and RFI noise. This is a key advantage of our 40G QSFP+ Active Optical Cable AOC for dense power-heavy server racks.
Q5: Is this 15m 40G QSFP+ AOC suitable for low-latency HPC and high-frequency trading networks? A: Yes. It delivers stable low latency and strong anti-interference performance, making products from our 40G QSFP+ Active Optical Cable AOC manufacturer a reliable choice for HPC clusters and core data center backbone connections.
Q6: What information should I provide when ordering third-party 40G AOC for Cisco switches? A: You need to confirm your exact switch model and firmware version. Our 40G QSFP+ Active Optical Cable AOC manufacturer can pre-program EEPROM to match Cisco requirements for smooth port recognition.
Q7: Will Cisco IOS firmware upgrades create compatibility issues for aftermarket 40G QSFP+ AOC? A: MSA-compliant AOC like our products works through most minor firmware updates. Rare vendor lock updates may block unbranded modules, and our 40G QSFP+ Active Optical Cable AOC manufacturer can support re-coding upon request.
Q8: Can field technicians reflash the EEPROM of this AOC to support other brand switches? A: On-site reflashing requires dedicated programming hardware and software. Confirm your target hardware before ordering. HYTOPTODEVICE, your 40G QSFP+ Active Optical Cable AOC manufacturer, provides full coding support.
Q9: Are open-source network operating systems such as SONiC compatible with this Cisco matched 40G QSFP+ AOC? A: Yes. SONiC follows MSA standards without strict vendor locking. Our 40G QSFP+ Active Optical Cable AOC can plug and play stably on open network platforms.
Q10: Do both ends of this direct-connect AOC need independent EEPROM configuration? A: Yes, each QSFP+ end needs EEPROM data matching the connected switch. Our 40G QSFP+ Active Optical Cable AOC manufacturer will handle dual-end coding based on your deployment plan.
Q11: What rack conditions can trigger overheating of QSFP+ AOC transceiver modules? A: The modules are rated 0°C–70°C. Poor airflow and hot sealed racks raise temperature rapidly. You can monitor real-time module temperature via DDM data from our 40G QSFP+ Active Optical Cable AOC.
Q12: Does prolonged high ambient temperature reduce the operational lifespan of 40G QSFP+ AOC? A: Long-term operation near or above 70°C accelerates laser diode aging and shortens service life. Our 40G QSFP+ Active Optical Cable AOC passes temperature cycling testing for consistent reliability.
Q13: Does this 40G QSFP+ AOC meet low-power requirements for green data center builds? A: Yes. Power consumption stays below 1.4W, which helps lower overall power budget for energy-efficient data center designs from our 40G QSFP+ Active Optical Cable AOC manufacturer.
Q14: What happens if the AOC cable is crushed or heavily squeezed during installation? A: Heavy compression can crack internal glass fibers and break the optical path, even with an intact outer jacket. Our 40G QSFP+ Active Optical Cable AOC manufacturer advises avoiding sharp bends and crushing during cable routing.
Q15: What is the typical plug-unplug cycle rating for the pull-tab latches on these 40G QSFP+ AOC connectors? A: Standard pull-tab latches support roughly 50–100 normal insertion cycles. Rough pulling on the cable body easily breaks the latch. Every unit from our 40G QSFP+ Active Optical Cable AOC manufacturer undergoes latch inspection before shipment.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






