| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-H40G-AOC20M | |
| 2 | Arista Networks | AOC-Q-Q-40G-20M | |
| 3 | Dell (Force10) | CBL-QSFP-40GE-20M | |
| 4 | Juniper Networks | JNP-40G-AOC-20M | |
| 5 | NVIDIA/Mellanox | MC2210310-020 | |
| 6 | H3C | QSFP-40G-D-AOC-20M | |
| 7 | Extreme | 40GB-F20-QSFP | |
| 8 | Brocade | 40G-QSFP-QSFP-AOC-2001 |
Key Technical Specifications
| Cisco Compatible |
QSFP-40G-AOC20M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP+ to QSFP+ | Max Data Rate | 40Gbps |
| Operating Wavelength | 850nm | Fiber Cable | OM3 MMF |
| Cable Length | 20m (66ft) | Power Consumption | ≤1.4W |
| Jacket Material | OFNP | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Minimum Bend Radius | 30mm | Protocols | 10G/40Gigabit Ethernet or Fibre Channel |
| Application |
InfinibandQDR/DDR/SDR,40G Ethernet,Data Center,Fibre
Channel
|
Warranty | 5 Years |
Usage Guidelines & Best Practices
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this QSFP+ AOC Active Optical Cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.






Q1: What is the minimum bend radius requirement for this 20m 40G QSFP+ AOC during rack routing? A: You must maintain a minimum bend radius of roughly 30mm. Sharp bends beyond this limit will fracture internal glass fibers and permanently disable the link of this QSFP+ AOC Active Optical Cable from our supplier.
Q2: Does this 40G QSFP+ to QSFP+ AOC support symmetrical bidirectional 40Gbps wire-speed traffic? A: Yes, it runs full 40Gbps bandwidth simultaneously in both transmit and receive directions without bandwidth compression for data center workloads.
Q3: Will long 20-meter transmission bring accumulated jitter and affect signal stability? A: No. Integrated CDR circuits inside the optical modules suppress signal jitter effectively and keep bit error rate at an extremely low level.
Q4: Can I run different speeds on the two ends of this point-to-point QSFP+ AOC link? A: No, both QSFP+ ports must work at 40Gbps. This cable cannot negotiate down to 10G or 100G speeds directly without adapters.
Q5: What log alerts indicate an EEPROM code mismatch on Cisco recognized AOC? A: Common prompts include "Unsupported transceiver detected", "Security checksum error", or "Unqualified optic detected", which signal incorrect vendor programming.
Q6: Can this 40G QSFP+ AOC work when inserted into a 100G QSFP28 port directly? A: QSFP+ electrical and signal specifications are designed for 40G. It cannot establish a normal link inside a native 100G QSFP28 port without dedicated downshifting adapters.
Q7: How can I verify that the Cisco switch correctly identifies this QSFP+ AOC after installation? A: Use CLI commands like show interface status or show inventory to confirm the transceiver is detected and the interface shows up.
Q8: Can I connect multiple QSFP+ AOC cables in series to extend the overall transmission distance? A: No, active optical cables cannot be daisy-chained. Cascading will break the optical path and result in complete link failure.
Q9: What should I do if the link fails to come up after plugging in this 40G AOC? A: Double-check the switch port configuration, reseat both QSFP+ connectors firmly, and check DOM diagnostic data for abnormal optical parameters.
Q10: Will stepping on or squeezing the outer jacket of this AOC destroy internal optical fibers? A: Yes. External compression can crack internal glass fibers. The jacket may look intact while the optical transmission path is permanently damaged.
Q11: Is this 20m QSFP+ AOC heavy enough to cause sagging on switch port cages? A: No. AOC fiber construction is much lighter than copper DAC cables, eliminating mechanical stress and port sag issues on switch slots.
Q12: Is on-site splicing or repair feasible if the AOC jacket gets pinched or cut during deployment? A: No. The optical transceiver components are pre-integrated into the cable assembly. Damaged AOCs cannot be repaired and require full replacement.
Q13: Can I use this QSFP+ AOC for outdoor cabling or non-temperature-controlled warehouse environments? A: No. Standard AOC is designed only for indoor climate-controlled data centers, with no waterproof or ruggedized protection.
Q14: What support will I get if I receive bulk AOC with wrong vendor EEPROM coding after purchase? A: As your reliable QSFP+ AOC Active Optical Cable Supplier, HYTOPTODEVICE provides exchange, return or re-programming service for coding compatibility issues upon delivery.
Q15: Can I request custom non-standard lengths instead of stocked standard sizes for large enterprise orders? A: Standard lengths including 1m,3m,5m,7m,10m,15m,20m,30m are kept in stock. Custom lengths are available subject to MOQ requirements.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






